INCH-POUND
MIL-DTL-9320E
7 May 2010
SUPERSEDING
MIL-DTL-9320D
3 November 2008
DETAIL SPECIFICATION
SIGNAL, WARNING, AUDIBLE, FOR HEADSET, TYPE MA-1
Inactive for new design after 28 September 1999.
This specification is approved for use by all departments and agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers one type of audible warning signal designated
MA-1 for operation on 28 volts (V) direct current (DC).
1.2 International standardization agreement number.
STANAG 3370 (see 6.4)
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements of the documents cited in sections 3 and 4 of this specification, whether or
not they are listed.
Comments, suggestions, or questions on this document should be addressed to Defense Supply
Center Richmond, ATTN: DSCR-VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-
5616 or e-mailed to STDZNMGT@dla.mil. Since contact information can change, you may
want to verify the currency of this address information using the ASSIST database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 6340
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business